Black Widow Security BW RAS 100 Instalační manuál

Procházejte online nebo si stáhněte Instalační manuál pro Bezpečnostní systémy pro řízení přístupu Black Widow Security BW RAS 100. Black Widow Security BW RAS 100 Installation manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 7
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
BEFORE INSTALLING THE STARTER DISABLE/KEYLESS ENTRY SYSTEM
DO read through this installation manual.
DO NOT install the control module in an engine compartment.
The alarm may arm itself when power is first connected.This is a normal condition.
ITEMS SUPPLIED WITH THE STARTER DISABLE/KEYLESS ENTRY SYSTEM
Receiver and control module Valet/override switch
Two 2-Button or 3-button, code learning LED status indicator
transmitters
Wiring harness, fuseholder, & fuse
Door lock harness
OPTIONAL ACCESSORIES
Backup battery...............................................BWS-500 Window roll up...........................................................WRM-2
Remote starter ..............................................RAS-101 Power door lock.........................................................PDL-50
Trunk release .....................................................TR-100 Relay ....................................................................................SPDT
Starter disable relay socket.........................BRS-003 5-wire door lock relay & socket ...............BRS-008P16
(+) door lock Inverter..............................BW-34516
SPECIFICATIONS
Operating voltage..................+12 VDC Neg. Ground
Code learning..........................................3 Codes Max.
Current consumption............5 mA (max) disarmed.
Door lock/unlock output .........................(-) 500 mA.
Channel 2 output drive.............(-) 500 mA variable.
Remote control transmit frequency.......................310 mHz.
Passive arming delay..................................30 Seconds approx.
Auxiliary output drive...............................250 mA maximum.
Flashing output drive .................................(-) 250 mA 30 sec.
Dome light output......................................(-) 250 mA 30 sec.
INSTALLATION MANUAL
STARTER
DISABLE/
KEYLESS
ENTRY
SYSTEM
INSTALLATION MANUAL
Zobrazit stránku 0
1 2 3 4 5 6 7

Shrnutí obsahu

Strany 1 - INSTALLATION MANUAL

BEFORE INSTALLING THE STARTER DISABLE/KEYLESS ENTRY SYSTEM•DO read through this installation manual.•DO NOT install the control module in an engine co

Strany 2

- 1 -INSTALLATION INSTRUCTIONSIMPORTANT:Make all wiring connections to the vehicle before connecting the main 6-pin harness and all plug-in connectors

Strany 3

- 2 -11. Connect the Main 6-Pin Wiring Harness and all pin connectors to the Control Module. Install the fuse in the RED wire of the main wiring harne

Strany 4

- 3 -CONNECTOR PIN NUMBERS AND WIRE COLOR CODES6 PIN HARNESSPIN Wire Color Function1) Red Main Power hook to constant 12v+ source2) Brown Negative Ou

Strany 5 - RECEIVER

BLUEGREENREDLOCK (-) PULSE+12V CONSTANT OUTPUTUNLOCK (-) PULSERECEIVERMODULEVALET SWITCHLEDSTARTER DISABLE INPUT/OUTPUTS}WIRING HARNESS2nd CHANNEL (-)

Strany 6 - DIAGRAMS:

87858687a3087858687a3087858687a3087858687a3087858687a30X CUT X X CUT X 87858687a3087858687a30- 5 -POWER DOOR LOCKDIAGRAMS:The Starter Disable/Keyless

Strany 7 - 752/1/L Rev.7 091997

PROBABLE SUGGESTEDSYMPTOM CAUSE CORRECTIONKeyless will not go RED or YELLOW wire not connected RED wire should connect directly tointo Code Learning

Komentáře k této Příručce

Žádné komentáře